Fluid Bed Drying Equipment
1.XF Horizontal Fluidizing Dryer Introduction
Boiling drier also known as intermittent fluidized bed drier. Boiling means that the material will in the state of “fluidizing”. Scattered granular wet materials charges into the drier through the hopper. After filtration, the air goes into the air distribution chamber of the host at the best dry air temperature, distributing by the butterfly valve, passing through the distribution plate at the bottom of the host, contacting with the materials, making the materials “boiling”in the drier (fluidized state); The “boiling” particles contacts with the hot air sufficiently, completing the process of strong heat and mass transfer. After drying, the material is pumped into the cooling room, cooled by natural cooling, then discharged. The waste air passes through the inner bag filter then emptying after fan.
2.Product Characteristics
Low drying cost, significant economic benefits.
Residence time of the materials in fluidized bed can be adjusted as you need. Lower water content products can be obtained.
High thermal efficiency, great dry strength,small footprint, low investment, suitable for a broad area.
Completely closed system, negative pressure operation, no dust emissions, good operating environment.
Without moving parts (except fan), stable and reliable, simple, easy to operate.
Drying and cooling complete in the same equipment. The charge method is Bulk feeding.
3.Technical Parameters
Model | Fluidizd area | Feeding Capacity(bulk density)(Stacking density0.5g/cm3) | Fan Power | Steam Consumption | ||
XF05 | 0.5 | 60 | 11 | 40 | ||
XF07 | 0.7 | 90 | 15 | 80 | ||
XF10 | 1.0 | 120 | 18.5 | 120 | ||
XF12 | 1.2 | 150 | 22 | 160 | ||
Host Installation Reference Size | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | F(mm) |
XF05 | 3380 | 3240 | 1420 | 1800 | 700 | 1100 |
XF07 | 4130 | 3880 | 1420 | 2100 | 800 | 1100 |
XF10 | 4560 | 4720 | 1570 | 2160 | 900 | 1200 |
XF12 | 4580 | 4720 | 1570 | 2160 | 900 | 1200 |
Note: The inler air temperature and the drying time have been deceided by the material characteristics. |
4.Application Examples
Inorganic matter: sodium perchlorate, persulphates, sodium perborate, basic nickel carbonate.
Organic matter: Aminoguanidine bicarbonate, Hydantoin, 1-chloroanthraquinone, tartaric acid, sodium tartaric acid, potassium tartrate, o-Chlorobenzoic acid.
Medicine: sulfadiazine,sulfathiazole, clarithromycin,L-tryptophan, tetracycline, sulfadoxine.
Food and feed additives: Oxathiazinone dioxide, feeding chlortetracycline, potassium sorbate, betaine.
Dye: red base, Cationic Golden Yellow X-GL, Cationic Red X-GRL, Cationic Blue X-GRRL.
Pesticides: chlorpyrifos, glyphosate, phosethyl-Al, tebuconazole, acephate.
Chemical Agents: ferrocene, casein.
5.FAQ
1.What is the minimum quantity to make the order?
Just only one set is OK. (although it is the lab mini model.)To meet the customer's needs it our aim.
2.How about the delivery after the contract effects?
Once the contract is ok, we will make the schedule order,and usually speaking, 30-45 days is needed, for some whole product lines, it needs 75-90 days to finish the work.
3.How about the quality of your machines?
Jiacheng has been making the special machine for several years,and most of customers come from all of the world. We have the series inspection for each making schedules. And all the workers have enough experience. So the praise from the customers is our best quality.
4.How about the after-sale service?
We will offer the free installation on site and the engineer will teach the operator how to operate the machine well and how to make the maintenance in future. Also we will provide the spare parts for whole life.
5.Would you please make the test for me because we are doing the research?
All the customers are welcome to take your raw material to make the test in Kaide.We also want to learn more knowledge from the different industry and keep advance for every material.